Hose Diaphragm Valves DN 15 - DN 200
type 100.101



Range of application:
acids, alkaline solutions, aggressive liquids, sludges,waste water, sand-water mixtures, ore-sludge and coal-silt, abrasive media, powdery products (like e.g. cement, lime, gypsum etc.), mineral oil, water, air, neutral media, liquids containing solids, crystallizing media, highly viscous media, syrup, juices, mash.

Hose Diaphragm Valves DN 15 - DN 200 type 100.101
Fig. 101
zoom in




Construction:
free and smooth opening passage,
without stuffing box,
with interchangeable rubber lining,
with controlled operation,
body with polyester powder coating.

Materials:
see table (other materials on demand).

Operating pressure:
DN 15 - 80   max. 6 bar
DN 100   max. 5 bar
DN 125 - 200   max. 3 bar

Operation:
with handwheel

Flange connection:
DIN 2501, PN 16,
DIN 2533 / EN 1092-2, PN 16
DN 200 =  DIN 2501, PN 10,
DIN 2532 / EN 1092-2, PN 10
Special constructions:
rubber lining in quality NR food or heat resistant,
"in quality Perbunan NBR or Neoprene CR,
"in quality Butyl llR, Hypalon CSM or EPDM,
"in quality NR with PTFE-foil,
"with steel spiral for light vacuum,
stem in brass or stainless steel, stem extension, stem fixing nut and stroke limitation, limit switches, with position indicator, with chain wheel,
in bigger sizes, for higher pressure stages, with pneumatic and electric actuator, hose diaphragm float valves, hose diaphragm safety valves.
DNLØDHH₁ØdB¹)weight
approx. kgs
15130951631781101054
201501051651851101284,6
251601151601851101285,7
321801401802101601348,2
4020015019022017015510,7
5023016520524017017813,2
6529018526030020024020,5
8031020028034520024525
10035022036044025029039,8
12540025039049030035055,1
15048028546059533041075
175550315505650430465102
200600340520650430539119,5
dimensions in mm,
¹) max. valve width in mm (not drawn)
partdesignationmaterial
1upper part of the body ¹)GG 25
2lower part of the body ¹)GG 25
3rubber liningNR (+85°C)
4pressure partGGG
5divided ringsteel
6guiding nutGG 25
7stem1.4021
8handwheelsteel
9handwheel nutstainless steel
10bolts with nutszinc-coated steel
11holding screwzinc-coated steel
12holding disczinc-coated steel
¹) parts 1 and 2 to be ordered together only.

Please quote the medium, concentration, temperature,
max. and min. working pressure in inquiries and orders.

We reserve the right to alter technical data.
back to overview
download data sheet